ru ua

Electroyuzhatommontazh Ltd.

Supply list

(information over tel. +38 057 7662072)
CMI and Automatic Means Sensors Boards for NPP The boards are used for accommodation primary devices which control the parameters of technological installations. The boards are housed in special service and semi-service rooms of technological systems of NPP and NSP. Climatic version - УХЛ4 as per GOCT 15150-69.
Metal Structures
for Cable Laying
Electrotechnical zinc coated steel duct sections

The electrotechnical zinc coated steel duct sections of КП type are aimed for housing power and control cables or wire either outdoors or indoors. Climatic version - T (zinc coating). Protection grade - IP31 as per GOST 14254-80.

Zinc coated block-type metal duct sections

The zinc coated block-type metal duct sections of ККБ type are aimed for housing power cables up to 10 kW or both power and control cables at service sites, frame structures, columns and walls, over-hanging inside buildings as well as outdoors on special technological trestles and similar structures. Climatic version - У3, T (zinc coating). Protection grade - IP33 as per GOST 14254-80.

Punched Steel Parts for Electric Equipment Mounting

These are intended for fixing cables, wires, pipes and apparatus used for electric mounting works as well as for constructing various steel structures needed for electric mounting works.

Fittings for Control Devices and Instruments Mounting The items are intended for installation of primary transducers, control-and-measuring instrumentation used for measuring, signaling and adjusting the temperature, pressure, discharge, level and other technological parameters at TPP and NPP.
Boxes For Cable Wiring
up to 1000 V
Terminal Boxes of KZ Type

Terminal boxes are used for branching copper and aluminium wire and cables with cross-section from 0,5 to 6 mm2 in secondary commutation circuits with voltage up to 600 V. Climatic version - УХЛ3 as per GOST 15150-69. Protection grade - IP54, IP55 as per GOST 14254-90.

Distribution Cubicles These are intended for distribution of electrical power, electric equipment protection at overloads and short circuits for infrequent (up to 6 per day) operational switching on/off of electrical circuits with rated voltage of a.c. 380 V. Climatic version - У3 as per GOST 15150-69. Rated voltage - a. c. 380 V, 50 and 60 Hz. Protection degree IP21, IP54 as per GOST 14254-80.
Electrically Driven Valve Units Electrically driven valve units are designed for mounting the primary and secondary electric circuits as well as for local control of valves. Units are supplied eithers with "ШР","2PTT","РБН1" connection or with "ЗТ" clamp.
Stands for Control Devices and Instrumentation for TPP The stands are intended to accomodate pressure gages of different function which control parameters of technological installations with aggressive and non-aggressive media with pressure up to 38 MPa. Climatic version - УХЛ4.